TruXedo Truck Bed LED Lighting System - 2006 Ford F-150- Video
Today on our 2006 Ford F150, we'll be installing the Truxedo Tonneau Covers, B-Light battery powered truck bed lighting system, part number TX1704998. As you will see, these battery powered truck bed lighting systems run on 3 AA batteries. They adhere to whichever section of your bed you would like to put them on with double sided tape as well as the battery box where the on/off switch is, has two holes that you can also add two screws to if you choose. The screws are not supplied with the kit and you will need to come up with them separately. On this particular bed, there's a spray-in bed liner. So we're going to go ahead and use two separate screws to help mount the box to the side of the bed. Because this truck has a Tonneau cover on it and a spray-in bed liner, we're going to actually mount the lighting strip to the underside of the Tonneau cover rail. Before we do any mounting though, we're going to go ahead and undo the four Phillips heads screws. more
11/13/2014 8:17:06 AM
TruXedo B-Light LED Truck Bed Lighting System Installation - 2013 Ford F-150- Video
Today on our 2013 Ford F-150 we'll be installing the TruXedo B-Light LED lighting system for truck beds, part number TX1704523. We'll begin our install by deciding where to place the lights in the bed of our truck. We'll peel off the adhesive backing and stick it on the underside of the rail of the tonneau. We'll then repeat these steps for all three of the other LED casings. As we get towards the end of the truck bed here at the tail gate you'll notice our vehicle is equipped with a bed rug. We'll peel back the bed rug and insert the wire into the hole allowing it to come through the bottom of the vehicle. more
6/17/2014 3:49:52 AM
Filter Videos
Filter Videos
